5
Power-off Memory
By power-on more than 4 hours, the water heater could keep setting information for 72 hours when
power supply is cut-off.
Glass - lined Protection Tank
.
Anode Protection
High Efficiency Energy-saving Insulation
A polyurethane foam insulating layer without Freon reduces heat loss effectively.
Caution:
.
The Glass-lined protection tank is a patent by A.O.Smith, coating tank with Silicide smoothly and
fusion at 870
℃
. The anti-rust and anti-scaling glass coating has pass 100,000 cycles fatigue life test in
accordance with relevant UL Standards.
A powerful steel-core-anode rod is used to protect tank and greatly prolong service life of the water
heater.
Hot water over 50
℃
has the risk of causing scald. Please do take care of your
family when settingtemp over 50
℃
.
Intelligent Dormancy
If no operation is performed within 3 minutes, the water heater enters into a dormant state.
Touch control panel is used for easy operation of this water heater. It displays electrical energy
consumption, set temperature, actual temperature, timer etc. The user can select the set temperature
within the range of 35°C - 75°C.
Touch control panel
•
•
Program
Program is to set clock, and timers for heating. Two timers are available.
The heater may be hidden in the suspended ceiling to save space,and the wired remote control
can be installed at a visible and convenient place.The wired remote control can be mounted
on the wall or imbedded in the wall.
Wired Remote control
Heating mode
This water heater has three types of heating modes.
Selection can be made based on the season and purpose of hot
water, more convenient and energy-saving.
1. "STANDARD": Heat the full tank water at lower power mode.
2. "SINGLE": Provide half tank hot water rapidly to suffice single shower requirement.
3. "MULTIPLE": Provide full tank hot water rapidly to suffice multiple shower requirement.
Instant heating
When the water heater is in timer mode, press the " instant " key and the water heater enters the heating
state immediately. The heating indicator glows, when the temperature preset by users is reached, the
water heater returns to the state before setting. Also to exit from the instant heating mode, press the
"instant" key again.
