A-Neuvideo HD-44G, Инструкция по эксплуатации

Страница: 5 / 20

3
FRONT PANEL
FRONT PANEL
q
POWER SWITCH:
The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and
is receiving power. The Switcher will remember that last state during a power cycle. When power is removed and resorted, the last
configuration will be evoked.
w
INPUT SELECT BUTTONS:
Input sources (1) to (4) LCM illuminates blue to indicate that a video source is present on that input.
e
OUTPUT STATUS DISPLAY:
Each Output (destination) Channel shows which input (source) is assigned.
r
DESTINATION SELECT BUTTONS:
Separate outputs (1) thru (4) select buttons are provided for each destination assignment.
Routing can be Source to Destination or one source to multiple destinations. Example : Press Destination 1,2,4 then press Source 2 will
route Input 2 to Output 1,2,4 respectfully.
t
EDID MODE SELECT BUTTONS:
Used to select EDID mode using Input buttons #1 and #2.
y
IR SENSOR:
The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.
u
SOURCE SELECT BUTTONS:
Separate inputs (1) thru (4) select buttons are provided each source selection.
i
FUNCTION KEY - ALL
Disables (mute) video on all destinations OR Selects the same source to all destinations.
Option 1
- Press
ALL
followed by
OFF
button. The display will show “ 0 “ indicating all destinations
have no video selected.
Option 2
- Press ALL followed by Source 1 thru 4. The display will show the Source selected.
- Press ENTER The pre-set source selection will be assigned all destinations.
A NEU VIDEO