A-Neuvideo HD-44G, Инструкция по эксплуатации

Страница: 18 / 20

16
ETHERNET & rs-232 SERIAL INTERFACE
ETHERNET SERIAL INTERFACE CONNECT a PC or CONTROL SYSTEM. VERSION COMPATIBLE V2.0
For a complete list of commands, please reference external document extended Ethernet Protocol Instruction Manual.
Example of the commanded string to route Input 3 to Output 4
OUTPUT04 03;
ETHERNET SERIAL INTERFACE
Pin Ethernet Reference
1 TxOP TX +
2 TxON Tx -
3 RxIP RX +
4 NC
5 NC
6 RxIN Rx -
7 NC
8 GND
ETHERNET TCP/IP PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0 )
*** When Ethernet is used, the switcher will not accept commands from the RS-232 port. ***
RS-232 SERIAL INTERFACE CONNECT a PC or CONTROL SYSTEM. VERSION COMPATIBLE V2.0
Example of the commanded string to route Input 3 to Output 4
OUTPUT04 03;
RS-232 Configuration
RS-232 cable is a straight thru cable and not null-modem
Definition Pin Pin Definition
1 1 DCD
Tx 2 2 Rx
Rx 3 3 Tx
4 4 DTR
GND 5 5 GND
6 6 DSR
7 7 RTS
8 8 CTS
9 9 RI
RS-232
RS-232 SERIAL INTERFACE PROTOCOL COMMANDS ( Ethernet / RS-232 Control driver V2.0 )
The HD-44G switcher can be controlled via the RS-232 serial control port to allow for interfacing to a PC, or similar third party control
system.
The serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1. When the unit
recognizes a complete command it will perform the requested action - there is no delimiter character required.
A NEU VIDEO
Note :
Control the switcher
SPD : Speed
LINK : Ethernet link
RJ-45 Female 8P-8Cconnector
HD-44G
Device
PC