A-Neuvideo HD-44G, Инструкция по эксплуатации

Страница: 14 / 20

PIN CONFIGURATION:
ANI-101 and ANI-101C Transmitter Pin configuration
1. ANI-101 IR 300M Transmitter
Device Cable (3C) IR Transmitter (ANI-101)
ANI-101 Maximum Distance ~ 984 feet (300M)
ANI-101C Maximum Distance ~ 6 feet (2M)
ANI-101
IR Transmitter Set
R oHS /95/E C
DC 12V
IR out
From
Receiver
IR in
To
Receiver
CAT6/6a/7
OUTPUT
ANI-101
IR Tx
ANI-101C
Transmitter Cable
IR Transmitter cable 6ft (2M)
R oHS /95/E C
DC 12V
IR out
From
Receiver
IR in
To
Receiver
CAT6/6a/7
OUTPUT
ANI-101C
IR Tx
ANI-101
IR Transmitter Set
Note: The External IR jack has voltage on the “Ring” portion of a 3-conductor plug. You must use a 3-conductor plug (aka: stereo plug).
Using a 2-conductor plug will short out the power supply. Always make connections with the switcher power off.
*** When you plug the External IR extender into the switcher, the front panel IR transmitter remains active. ***
IR Transmitter cable 6ft (2M)
ANI-101C
Transmitter Cable
2. ANI-101C IR 2M Transmitter
Device Cable (3C) IR Transmitter (ANI-101C)
VCC (Ring)
Signal (center)
GND (Sleeve)
Tip Ring
Sleeve
Tip: Signal
Ring :VCC
Sleeve: GND
Ring
Tip (center)
Sleeve
Signal (center)
GND (Sleeve)
Tip Ring
Sleeve
Tip: Signal
Ring: NC
Sleeve: GND
Ring
Tip (center)
Sleeve
ANI-101 Maximum Distance ~ 984 feet (300M)
ANI-101C Maximum Distance ~ 6 feet (2M)
12
IR EXTENDER
A NEU VIDEO