A-Neuvideo ANI-H-KIT, Инструкция по эксплуатации

Страница: 7 / 28

5
OPERATION CONTROLS & FUNCTIONS
WALLPLATE
FRONT PANEL
q
FAC RESET Button: Press and hold for 5 seconds to reset the unit to its factory
defaults.
w
SERV.: This slot is reserved for firmware update use only.
NOTE:
This USB port can provide up to 500mA to connected devices.
e
L/R IN: Connect to the stereo analog output of a device such as an audio player
or PC for embedding into the HDBaseT
™
output.
r
INFO Button: A short press of this button will switch between the available inputs.
Pressing and holding this button for 2 seconds will activate the information OSD.
t
VGA IN: Connect to VGA source equipment such as a PC or laptop.
y
HDCP LED: This LED indicates the HDCP mode of the current input. Green
indicates Follow Display mode, orange indicates Follow Source mode, off indicates
HDCP is disabled.
SRC LED: This LED indicates which source is currently selected. Green indicates
the HDMI input, orange indicates the VGA input.
PWR LED: This LED will illuminate to indicate the unit’s power and link status.
Orange indicates the unit is on and receiving power, green indicates the unit is on,
receiving power, and has successfully linked to a compatible Receiver.
u
HDMI IN: Connect to HDMI source equipment such as a media player, game
console or set-top box.
BACK PANEL
q
CAT5e/6/7 OUT: Connect to a compatible HDBaseT
™
Receiver with a single
CAT5e/6/7 cable for transmission of all data signals.
w
DC 12V: Connect a 12V DC power adapter to the twin terminal block and connect
it to an AC wall outlet for power. (Optional, not required when powered by PoH from
the Receiver.)
A NEU VIDEO