14
RS-232 & Telnet Commands
RS-232 & Telnet Commands
COMMAND
DESCRIPTION OF PARAMETER
HELP
Show all available commands.
?
Show all available commands.
GET FW VER
Show the unit’s firmware version.
GET MODEL NAME
Show the unit’s product type.
GET MODEL TYPE
Turn unit’s power on.
SET FACTORY DEFAULT
Reset the unit’s IP configuration to the factory defaults.
SET SYSTEM REBOOT
Reboot the unit.
GET MAC 1 ADDR
Show the unit’s MAC address.
SET IP MODE N1
Set the IP address assignment mode.
Available values for
N1:
STATIC [Static IP mode]
DHCP [DHCP mode]
GET IP MODE
Show the current IP mode.
GET IPCONFIG
Show the current IP address details.
SET IPADDR N1
Set the static IP Address.
N1
= X.X.X.X
[X = 0 ~ 255]
GET IPADDR
Show the current IP address.
SET NETMASK N1
Set the netmask address.
N1
= X.X.X.X
[X = 0 ~ 255]
GET NETMASK
Show the current netmask.
SET GATEWAY N1
Set the gateway address.
N1
= X.X.X.X
[X = 0 ~ 255]
GET GATEWAY
Show the current gateway.
SET IN N1 NAME N2
Set the name of input
N1.
N1
= 1 ~ 2
[Input number]
N2
= {Name}
[16 characters max]
GET IN N1 NAME
Show input
N1’s
current name.
N1
= 1 ~ 2
[Input number]
SET OUT A NAME N1
Set the name of the output.
N1
= {Name}
[16 characters max]
GET OUT A NAME
Show the output’s current name.
SET OUT A ROUTE N1
Switch the output routing source to input
N1.
N1
= 1 ~ 2
[Input number]
GET OUT A ROUTE
Show the output’s current routing source.
GET IN TYPE LIST
Show each input’s video type.
GET OUT TYPE LIST
Show the video type of the output.
SET OUT A MASK N1
Enable or disable the mask setting on output
N1
.
Available values for
N1
:
OFF
[Mask disabled]
ON
[Mask enabled]
NOTE:
When an output is masked, all video, including the banner, will be blanked out.
A
NEU
VIDEO
Содержание ANI-H-KIT
Страница 21: ...19 w allplate CONNECTION DIAGRAM Connection Diagram A NEUVIDEO...
Страница 22: ...20 receiver CONNECTION DIAGRAM Connection Diagram A NEUVIDEO...
Страница 26: ...THIS PAGE IS INTENTIONALLY LEFT BLANK...
Страница 27: ...THIS PAGE IS INTENTIONALLY LEFT BLANK...
