A-Neuvideo ANI-H-KIT, Инструкция по эксплуатации

Страница: 20 / 28

18
RS-232 & Telnet Commands
COMMAND DESCRIPTION OF PARAMETER
SET AUTOMATION EVENT N1 CEC
WAIT N2 SEC

Set the length of time to wait after an Automation Event’s CEC response has been
activated before ANY other Automation Event can be detected.
Available values for
N1:
1 [Power on]
2 [Out A source active]
3 [Out A source lost]
N2 = 1 ~ 300 [Wait time in seconds]
NOTE: If both an RS-232 and CEC event is activated by the same Automation Event,
the longer of the 2 wait times will be used.
GET AUTOMATION EVENT N1 CEC
WAIT

Show the wait time for the specified Automation Event’s CEC response.
Available values for N1:
1 [Power on]
2 [Out A source active]
3 [Out A source lost]
SET AUTOMATION EVENT N1 CEC
COMMAND N2

Set the CEC command to send when the specified Automation Event is activated.
Available values for N1: Available values for N2:
1 [Power on]
2 [Out A source active]
3 [Out A source lost]
1 [CEC power off]
2 [CEC power on]
3 [CEC active source]
GET AUTOMATION EVENT N1 CEC
COMMAND

Set the RS-232 operation mode of the unit.
Available values for
N1:
1 [Console Commands]
2 [Control]
GET UART 1 MODE

Show the current RS-232 operation mode.
SET UART 1 BAUDRATE N1

Set the RS-232 baud rate.
Available values for N1:
4800 [Baud rate]
7200 [Baud rate]
9600 [Baud rate]
14400 [Baud rate]
19200 [Baud rate]
38400 [Baud rate]
57600 [Baud rate]
115200 [Baud rate]
GET UART 1 BAUDRATE

Show the current RS-232 baud rate.
SET UART 1 STOP BIT N1

Set the number of RS-232 stop bits to use.
N1 = 1 ~ 2
GET UART 1 STOP BIT

Show the current RS-232 stop bits setting.
SET UART 1 DATA BIT N1

Set the number of RS-232 data bits to use.
N1 = 5 ~ 8
GET UART 1 DATA BIT

Show the current RS-232 data bits setting.
SET UART 1 PARITY N1

Set the parity value for RS-232.
Available values for N1:
0 [None]
1 [Odd]
2 [Even]
GET UART 1 PARITY

Show the current RS-232 parity setting.
NOTE: Commands will not be executed unless followed by a carriage return. Commands are not case-sensitive.
A NEU VIDEO