A-Neuvideo ANI-88UHD, Инструкция по эксплуатации

Страница: 6 / 16

4
OPERATION CONTROLS & FUNCTIONS
Rear Panel
q
CONTROL:
This port is the link for Telnet and WebGUI controls. Connect to an active Ethernet link with an RJ-45 terminated cable (for
further details, please refer to the Telnet Control section).
WARNING:
Please do not connect this port directly to the PC/Laptop as the Telnet function will not work.
w
RS-232:
Connects to a PC or control system with a D-Sub 9-pin cable for the transmission of RS-232 commands.
e
IR IN:
Connects to the supplied IR extenders for IR signal reception from the remote control of the Matrix. Ensure that the remote is
within the direct line-of-sight of the IR extender when used.
r
SERVICE:
Manufacturer use only.
t
HDMI OUT A~H:
Connects to HDMI equipped TVs or monitors for display of the HDMI Input source signal.
y
HDMI IN 1~8:
Connects to the HDMI Input source devices such as a DVD player or a Set-Top Box with a HDMI cable or DVI to HDMI
cable.
u
DC 24V:
Plug the 24V/DC power supply into the unit and connect the adaptor to an AC outlet.
Side Panel
q
FAN VENTILATOR:
These are air ventilation areas, DO NOT block these areas or cover it with any object. Please allow adequate
space around the unit for air circulation.
A NEU VIDEO
q
w
e
r
t
y u
q