A-Neuvideo ANI-88UHD, Инструкция по эксплуатации

Страница: 5 / 16

3
OPERATION CONTROLS & FUNCTIONS
FRONT PANEL
q
LCM:
Displays the setting information of each Input and Output setting.
w
POWER:
Press this button to power the device on/standby. The LED will illuminate green when the power is on, red when it is in
‘Standby’
mode.
e
LOCK:
Press this button to lock all the buttons on the panel. Press again to unlock. The LED will illuminate orange when locked.
r
IR:
IR Receiver window (accepts the remote control signal of this device only).
t
MENU:
Press this button to access the LCM menu system, from here EDID settings can be managed and the IP system settings are
displayed.
y
1~8/A~H AND OUT/IN:
Press the
OUT
button and then the number buttons to select the required Output ports, and press the
IN
button
and then a single number button to select the required Input source, finally press the
MENU
button to confirm the selection.
For Example:
If Outputs A~D need to be set to Input 1 and Outputs E~H need to be set to Input 2 then the following sequence of button
presses needed to be performed:
PRESS:
OUT►A►B►C►D►IN►1►MENU, and then press: OUT►E►F►G►H►IN►2►MENU.
NOTE:
If the
MENU
button is not pressed the selection will not be changed.
A NEU VIDEO
q w e r t y