A-Neuvideo ANI-1082UHD-KIT, Инструкция по эксплуатации

Страница: 10 / 40

8
REAR & SIDE PANEL
REAR PANEL
a
CAT AUDIO I/O 1~2:
Sends/receives audio to/from connected compatible CAT Audio devices via a standard CAT5e cable. This
connection allows audio to be sent to/from the matrix over greater distances than would normally be possible via standard cables. 48kHz
audio can be transmitted up to 984ft/300M, 96kHz audio can be transmitted up to 492ft/150M and 492ft/192kHz audio can be transmitted
up to 328ft/100M.
s
LAN:
Connects to an active Ethernet network to allow for Telnet and WebGUI control of the matrix as well as to share the network
(including Internet, if available) with connected compatible LAN equipped HDBaseT
™
receivers. This allows for any Ethernet equipped
device (e.g. a smart TV or game console) connected to the LAN port of a receiver to share the network/Internet access.
d
RS-232:
Connects directly to your PC/laptop to send RS-232 commands to control the unit.
f
SERVICE:
Used for firmware service updates in the field via a USB thumb drive. After connecting a USB thumb drive containing
appropriate firmware, please navigate via the front panel menu to
5-Firmware → 2-Update → YES
to begin the firmware update.
g
MAIN 24V & POH 24V:
Plug one of the 24V power supplies (included in the package) into the port marked
“MAIN 24V”
to power the
matrix unit. If you wish to connect PoH powered HDBaseT
™
receivers to the matrix, please plug the second 24V power supply into the
“POH 24V”
port. This will allow the matrix to provide 48v PoH to all connected HDBaseT
™
receivers.
SIDE PANEL
q
FAN VENT:
These are air ventilation areas. DO NOT block these areas or cover them with any objects. Please allow adequate space
around the unit for air circulation.
A NEU VIDEO