7
BACK PANEL
BACK PANEL
A
NEU
VIDEO
q
DC POWER INLET:
The switcher is fitted with a DC power plug
input connector. Ensure that the plug used is of an approved type
and is of sufficient current carrying connector capacity with the
correct voltage and connector polarity. 100~240Volt AC, 50/60Hz
power supply.
w
IR EXTENDER CONTROL:
Supports one IR extender. Extends
a maximum distance of up to ~984 feet/300M. When you plug the
external IR extender into the switcher, the front panel IR receiver
remains active.
e
RS-232 CONNECTION:
RS-232 control port allows for interfacing
to a PC, such as a computer or touch panel control, to the switcher
via this DB-9pin female connector for serial RS-232 control.
r
ETHERNET CONNECTION:
ETHERNET control port allows
for TCP/IP interfacing to a PC, such as a computer or touch panel
control (not a web-browser), to the switcher via this RJ-45 female
connector to control the switcher.
t
INPUTS- 1, 2, 3, 4, 5, 6, 7, & 8 HDMI:
Connects a HDMI signal
source to this Input. This HDMI port supports HDMI with embedded
audio and DVI with AUX audio sources. If you remove the HDMI screw
posts, you must use the provided HDMI Locking Post replacement
screws to keep the internal HDMI jack secure. Removing the HDMI
screws without installing the HDMI Locking Post replacement screws
will void your warranty.
y
OUTPUTS- 1, 2, 3, 4, 5, 6, 7 & 8 HDMI:
Connects a HDMI signal
source to this Output. This HDMI port supports HDMI with embedded
audio and DVI with AUX audio. If you remove the HDMI screw posts,
you must use the provided HDMI Locking Post replacement screws
to keep the internal HDMI jack secure. Removing the HDMI screws
without installing the HDMI Locking Post replacement screws will
void your warranty.
u
PREVIEW OUTPUT-01 HDMI:
Connects a HDMI direct digital
video/audio signal link to this female HDMI connector. This connector
supports HDMI digital video/audio and DVI digital video sources.
Preview port HDMI signal is the same as Output 1. If you remove
the HDMI screw posts, you must use the provided HDMI Locking
Post replacement screws to keep the internal HDMI jack secure.
Removing the HDMI screws without installing the HDMI Locking
Post replacement screws will void your warranty.
POWER SOCKET:
q
Connector Type: IEC 60320 C13
IR EXTENDER JACK:
Female jack - inner OD Ø 3.5mm
REMOTE PORT:
D-SUB-9pin female connector
This port also for Firmware updates
REMOTE PORT:
RJ-45 female connector
ETHERNET PORT:
Note: the Ethernet port and
RS-232 port CANNOT be used simultaneously.
Any connection to the Ethernet port will disable
serial commands sent to the RS-232 port.
HDMI CONNECTOR:
HDMI Type A SMD
19pin female socket connector
Note: With the proper adapters, the switcher can
be used with DVI digital video signals. HDCP
compliant. DVI supports the Audio input.
HDMI CONNECTOR:
HDMI Type A SMD
19pin female socket connector
Note: With the proper adapters, the switcher can
be used with DVI digital video signals. HDCP
compliant. DVI Audio is supported.
HDMI CONNECTOR:
HDMI Type A SMD
19pin female socket connector
Note: With the proper adapters, the switcher can
be used with DVI digital video signals. HDCP
compliant. DVI does not support audio.
