5
FRONT PANEL
FRONT PANEL - EDID, MEMORY & RECALL
o
FUNCTION KEY - EDID:
Used to display/change current
EDID
mode.
- Press
EDID
to select new EDID mode.
- Press
SOURCE
row #1 or #2 Select EDID modes.
- Press
ENTER
to ready memory location.
- Or press
EDID
again to cancel the operation.
Operation completes.
Note: Operation will abort if no keys are pressed within 5 seconds.
a
FUNCTION KEY - RECALL:
The system will show previously stored presets, up to a total of (16). Presets are stored in
local memory using Source keys 1 thru 8 or Destination keys 1 thru 8 as the memory preset
location.
- Press
RECALL
button.
- Press
1 THRU 8
on either Source or Destination row.
- Press
ENTER
The pre-set configuration will execute.
Operation completes.
Note: Operation will abort if no keys are pressed within 5 seconds.
- Or press RECALL again to cancel the operation.
s
FUNCTION KEY - MEMORY:
The system will show stored presets, up to a total of (16). Presets are stored in local memory
using Source keys 1 thru 8 or Destination keys 1 thru 8 as the memory preset location.
- Configure desired matrices.
- Press
MEMORY
button.
- Press
1 THRU 8
on either Source or Destination row.
- Press
ENTER
to ready memory location.
- Or press
MEMORY
again to cancel the operation.
Operation completes.
Note: Operation will abort if no keys are pressed within 5 seconds.
- Or press MEMORY again to cancel the operation.
A
NEU
VIDEO
