14
EDID FUNCTION
EDID SINGLE LEARNING MODE 2
LEARNING EDID #2
PASSING EDID FROM DESTINATION TO SOURCE
Multiple Learning mode #2 EDID setup
Key Press Sequence:
EDID > OFF > DESTINATION #1 thru #8 > ENTER
The EDID for HDMI has been Learned from the
Destination port to the Source port.
1. Press the
EDID
button: The LCM will show the current EDID status.
2. Press the
OFF
button: The LCM will show the current EDID LEARN
status.
3. Press the
DESTINATION 1-8
button: The switcher will LEARN destination
HDMI EDID and pass to the selected source. The switcher will Enable or Disable
HDMI EDID for the selected source.
4. Press the
ENTER
button to confirm changes. The LCM will return to the
default screen showing selected matrix routing status.
NOTE:
When the Source has “Learned” the EDID data from a destination, it will save that EDID information into EPROM and the EDID
data will not change. To change a saved HDMI EDID information, you have to select a new LEARNING destination to source or Disable
the LEARNING.
A
NEU
VIDEO
