13
EDID FUNCTION
EDID SINGLE LEARNING MODE
1
LEARNING EDID MODE-#1
LEARNING EDID FROM DESTINATION TO SOURCE
Single Learning Mode#1 EDID setup
Key Press Sequence:
EDID > DESTINATION # > SOURCE # > ENTER
The EDID for HDMI has been learned from the
Destination port to the Source port.
Press
EDID > DESTINATION > SOURCE > ENTER
1. Press the
EDID
button: The LCM will show the current EDID status.
2. Press the
DESTINATION 1-8
button: The LCM will show LEARNING
HDMI. The switcher will
LEARN
the destination HDMI EDID.
3. Press the
SOURCE 1-8
button: The switcher will Learn destination HDMI
EDID and pass to the selected source.
4. Press the
ENTER
button to confirm changes. The LCM will return to the
default screen showing selected matrix routing status.
NOTE:
The already learned EDID cannot be modified. You can only rebuild a new Learning EDID.
For Example:
When the source has “Learned” the EDID data from a destination, it will save that EDID information into EPROM and
the EDID data cannot change. Please select new learning destination to sources or change to one of the embedded EDID modes when
you want to remove the learning EDID memory from EPROM.
A
NEU
VIDEO
