4
FRONT PANEL
FRONT PANEL
q
POWER SWITCH:
The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and
is receiving power. The Switcher will remember that last state during a power cycle. When power is removed and resorted, the last
configuration will be evoked.
w
STATUS DISPLAY:
Front panel status display shows current matrix routing configuration. This same display also shows particular
configuration settings depending on your current function. In run mode (as shown above), the display shows each Output (destination)
channel and which input (source) is assigned.
e
IR SENSOR:
The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.
r
INPUT STATUS DISPLAY:
Input sources 1 to 8 LED illuminates blue to indicate that a video source is present on that input.
t
SOURCE SELECT BUTTONS:
Separate inputs 1 thru 8 select buttons are provided each source selection.
y
EDID MODE SELECT BUTTONS:
Used to select EDID mode using Input buttons #1 and #2.
u
DESTINATION SELECT BUTTONS:
Separate outputs 1 thru 8 select buttons are provided for each destination assignment. Routing
can be Source to Destination or one source to multiple destinations.
Example :
Press Destination 1, 3, 5 then press Source 2 will route Input 2 to Output 1, 3, 5 respectfully.
i
19 INCH EAR MOUNT PAIR:
Converts desktop to 19 inch rack mount. Bracket (part # 1 U-440L) INCLUDED. Image shows rack
mount bracket attached.
A
NEU
VIDEO
