9
REMOTE CONTROL
Before making any connections to the switcher. Observe the following:
•
Ensure the mains voltage supply matches the label on the supplied plug-pack (+/- 10%)
•
Ensure that the power switch is OFF
•
Ensure that all system grounds (earth) are connected to a common point.
•
Avoid powering equipment within a system from multiple power sources that may be separated by large distances
•
Connect all audio video sources and destination equipment
•
Power up all source and destination audio-visual sources
• For each destination output select the appropriate input source by using the front panel input 1~8 select buttons. The supplied IR
remote control or through the RS-232 serial communications port.
•
Upon power up the switcher will return to its last used setting before powered down.
IR REMOTE CONTROL KEY
q
w
SWITCH POWER ON or OFF:
Controller with a separate power ON and OFF
e
DESTINATION : 1 thru 8 OUTPUT SELECTION:
Press the destination button to select the output display channel.
r
SOURCE : 1 thru 8 INPUT SOURCE SELECTION:
Press input 1~ 8 sources with selection button
t
FUNCTION KEY:
Function selection buttons
ALL
OFF
EDID
RECALL
MEMORY
ENTER
LOCK
A
NEU
VIDEO
