5
Remote Control
Remote Control
A
NEU
VIDEO
q
POWER ON OR STANDBY:
Power on the Matrix or set it to standby mode.
w
INFO:
Press to check the serial baud rate and IP address. It will be displayed
in the top right corner of the screen, and disappear in five seconds or press the
button again.
e
INPUT 1/2/3/4:
Press these buttons to select input sources.
r
◄ ►:
Select the last or next input source.
t
OUTPUT 1/2/3/4:
Select the output display device.
y
ALL:
Select all output simultaneously.
For example,
when you press the
“All”
button and then press input
“1”
button, at this time the input
“1”
source will be
output to all display devices.
u
VIDEO MODE:
There are three video output modes: MATRIX, VIDEOWALL
and MULTIVIEWER. It will memorize the correspondence between the inputs and
outputs and the configuration which are set in each mode on Web page last time
when you switch the modes.
OPERATION INSTRUCTION:
You need to press the output button firstly and
then press input button to select the corresponding input source.
For example,
press Output-X (X means output button from 1 to 4 , including
“All”
button), then press Input-Y (Y means input button from 1 to 4) The Matrix can be
selected input and output source by using the IR remote. There are two ways to
receive the IR remote signal.
The first way:
The IR window accepts the IR remote signal. Using the IR remote,
thefurthest distance is 8 meters when the IR remote is directly faced to the matrix,
and 5 meters when the using angle is ± 45°. The diagram is shown as below:
The second way:
If the IR receiver window of the Matrix is blocked or the Matrix
is installed in a closed area out of infrared line of sight, the IR receiver cable can
be inserted to the
“IR EXT”
port to receive the IR remote signal. The furthest
distance of using the IR remote is 5 meters when the IR remote is directly faced
to the IR receiver head, and 3 meters when the using angle is ± 45°. The diagram
is shown as below.
HEX CODES
BUTTON
FUNCTION
HOUSE
CODE
BUTTON
CODE
POWER TOGGLE
08F7
4D
INFO
08F7
0B
INPUT 1
08F7
09
INPUT 2
08F7
54
INPUT 3
08F7
47
INPUT 4
08F7
42
PREVIOUS
SOURCE
08F7
48
NEXT SOURCE
08F7
4B
OUTPUT 1
08F7
0C
OUTPUT 2
08F7
19
OUTPUT 3
08F7
0F
OUTPUT 4
08F7
03
OUTPUT ALL
08F7
55
MATRIX
08F7
40
VIDEO WALL
08F7
10
MULTI-VIEWER
08F7
11
