A-LNC 800 Series, Руководство по эксплуатации

Страница: 9 / 34

Error! Use the Start tab to apply “Title 1” to the text need to be displayed here.
8

Processing information: Display the current system G code status, MST code status and the cutter
compensation and cutter number in use.

Load: Displays the current motor load status. This function is limited to bus drives.
Edit Group
2.2.
This group is mainly used for machining program editing, macro program editing, processing program
file management and machining program preview. All buttons in this group are listed below:

Open old files: Open the machining program existing in the system for editing and processing.

Archive: Save the modified machining program.

Graphics: A graphical preview of the machining program.

Editing: Perform editing actions related to the machining program, such as copying, pasting,
replacing, etc.

File management: Import and export of machining programs. Please refer to 3.3 for detailed
instructions.

Sorting processing: Provides the user to process the machining program after scheduling. For
detailed instructions, please refer to 3.4.

Graphic setting: Set the relevant parameters when the program graphics are previewed.

Manufacturer Macro: Edit the macros used inside the system.
※
This button needs to be switched to level 5 to appear.

Open new files: Open a new processing program on the system for users to write.
Compensation Group
2.3.
This group is mainly used for coordinate system setting, tool compensation setting, automatic tool setting,
centering function and tool changer setting. All buttons in this group are listed below:

Tool management: Set the tool length compensation and wear compensation, that is, set the tool
compensation table.

Teaching input: Set the mechanical coordinate of the corresponding axis into the selected coordinate
system.

Relative Clearing: Clear relative coordinates.

Centering function: Set the origin position of the system coordinate system by finding the optical
edge of the workpiece.

Automatic tool setting: Automatic tool setting function is performed according to the parameters set
on the page. For detailed instructions, please refer to 3.5.

Gang tool setting: Set the relevant parameters for the gang tool changer. For detailed instructions,
please refer to 3.6.1.

Bamboo hat type type tool magazine: Set the relevant parameters for the bamboo hat type type tool
magazine. For detailed instructions, please refer to 3.6.2.

Drilling setting: Set the offset of the drilling tool magazine. For detailed instructions, please refer to