Error! Use the Start tab to apply “Title 1” to the text need to be displayed here.
13
3.3.3.
Network disk import / export
i.
Users can directly import the machining program from the computer to the system or export the
machining program in the system to the computer through the sharing method of network disk.
ii.
It's required to set the computer IP and computer folder name to provide the shared folder on the
system. The parameter setting path is: Maintenance Group > Project Settings > Shared Document
(require to switch to level 5).
iii.
The user name and passwords of the PC may not be input (the shared folder on the computer side
cannot be set to use the passwords).
iv.
When the network disk import/network disk export is pressed, the system will automatically online.
After the connection is successful, an
icon will appear in the system title bar, indicating that
both parties have completed online.
v.
As shown in the figure below, the left side of the screen is all the machining programs in the system,
and the right side is all the machining programs in the shared folder of the computer.
