Error! Use the Start tab to apply “Title 1” to the text need to be displayed here.
16
iii.
Manually move the tool to the workpiece surface (or the machining platform) after the tool-setting
is completed.
iv.
Set the Z drop (press the Z drop on the screen, only the first tool needs to be set).
3.
Note
：
i.
The Z drop of the first tool must be set, and the user can modify the coordinate system of the Z
drop (The preset is G54).
ii.
It is not necessary to set the Z drop from the second tool, and only the tool-setting action is
required.
iii.
When using the tool compensation, the machining program must use the coordinate system set by
the Z drop (The preset is G54).
iv.
If different workpiece surfaces are used, the corresponding Z-drop coordinate system needs to be
modified.
Tool Magazine Setting
3.6.
3.6.1.
Gang tool setting
Function Path: Compensation Group > Next Page> Gang Tool Setting
1.
If the gang tool magazine is used, the related settings of tool magazine can be performed via this page.
2.
The tool-changing coordinate of gang tool is the actual tool-changing position. If it is necessary to
perform the tool-changing offset, it needs to be set in the offset parameters.
3.
Note: The value of the first speed and second speed of the tools must be set, otherwise the system will
give an alarm when the tool is changed.
