A-Link RoadRunner 21, Полное руководство

Страница: 59 / 112

„ ADD: To add an IP QoS session, place a check at the Enable IPQoS then click Add button. The
following screen wills pop-up.
„ Rule Name: Enter the IP QoS session name.
„ Source IP : Enter the Source IP Address.
„ Source Netmask : Enter the Source IP Subnet Mask.
„ Source Start Port : Enter the Source IP Start Port which PPP session can be activated.
„ Source End Port : Enter the Source IP End Port which PPP session can be activated.
„ Destination IP : Enter the Destination IP Address.
„ Destination Netmask : Enter the Destination IP Subnet Mask.
„ Destination Start Port : Enter the Destination IP Start Port which PPP session can be activated.
„ Destination End Port : Enter the Destination IP End Port which PPP session can be activated.
„ Protocol : Select the protocol from the drop down manual. The protocols supported are TCP, UDP,
ICMP and ANY.
„ Physical Port : Select the QoS Physical Port from the drop down manual.
„ Traffic Priority : Click and select the QoS session Traffic Priority from the drop down manual.
„ TOS Marking : Select the TOS Marking from the list or place a check at the Normal Service.
„ Apply: Click Apply to complete the setting.
„ Cancel: Click Cancel to ignore all the changes.
„ To complete and save the setting, go to TOOLS Æ System Commands and click Save All after
clicking the Apply button.
A-Link RoadRunner 21 Router 53