A-Link RoadRunner 21, Полное руководство

Страница: 101 / 112

A-Link RoadRunner 21 Router 95
7. Testing LAN path to your A-Link RoadRunner 21 Router.
Ans. To verify whether the LAN path from your PC to your A-Link RoadRunner 21 Router is
properly connected, you can “Ping” the A-Link RoadRunner 21 Router with the following
procedures:
1. From the Windows toolbar, click “Start” and select “Run”.
2. In the open field, type “Ping 10.0.0.2” and click “OK”
3. If the path is working, you should see the message in the following format:
Reply from 10.0.0.2 bytes = 32 time < 10ms TTL = 60
4. If the path is not working, you should see the following message:
Request timed out
If the path is not functioning correctly:
1. Make sure the LAN port LED indicator is on.
2. Check whether you are using the correct LAN cable.
3. Check your Ethernet Adaptor installation and configurations.
4. Verify that the IP address for your A-Link RoadRunner 21 Router and your workstation are
correct and that the addresses are on the same subnet.