background image

 

A-Link RoadRunner 21 Router

 

 

34

;

 

SCR: 

Security Cell Rate. This is an ATM (Asynchronous Transfer Mode) term to describe the 

security cell transmitted per second.

 

;

 

MBS:

 Maximum Burst Size. A term used in ATM (Asynchronous Transfer Mode) to specify 

the maximum number of cells which can be transmitted at the contracted PCR (Peak Cell 

Rate). Available only when VBR QoS is chosen.

 

;

 

CDVT:

 Cell Delay Variation Time. The Cell Delay Variation is a term used in ATM 

(Asynchronous Transfer Mode) to describe the time difference that is acceptable between 

cells being presented at the receiving host. Available only when VBR QoS is chosen. 

;

 

Auto PVC: 

Click to enable Auto PVC features. Auto PVC allows detection of virtual channels 

via the built-in mechanism for communicating ATM Layer information from DSLAM to the 

A-Link RoadRunner 21 Router. 

 

„

 

Apply: 

Click 

Apply

 to complete the connection profile’s setting. 

„

 

Delete: 

Click 

Delete

 to delete a connection. 

„

 

Cancel: 

Click 

Cancel 

to ignore all the changes. 

„

 

To complete and save the connection profile, go to 

TOOLS 

Æ

 System Commands

 and click 

Save All 

after clicking the 

Apply

 button. 

Содержание RoadRunner 21

















































































































Отзывы: