2
Setting Up the Device
Installing the new unformat Hard Disk Drive
1.
Disconnect the power cable of the device.
2.
Remove two screws on the rear panel, and then remove the
rear panel.
3.
Pull the bracket out from the disk bay.
4.
Place the hard disk drive on the bracket, and then secured
with two screws.
While placing the hard disk drive onto the bracket, align the
screw holes on the bottom of hard disk drive with the studs
on the base of bracket. The two studs are designed to
ensure the hard disk drive will be installed on the bracket
securely.
5.
Push the bracket into the disk bay all the way until it
connects the device.
6.
Replace the rear panel and secure two screws.
- 2 -
