Using IPFinder
1.
Insert the Installation CD-ROM into your computer’s CD-ROM
drive to initiate the Auto-Run program.
2.
Click the IPFinder item to launch the utility. The control
panel will appear as below.
Display the connected
device(s).
Double click to link
the device.
Click About to get the Version information of IPFinder.
Click Link to connect the selected device.
Click Change IP to modify the IP address of the selected device.
Click Search to find the IP address of the connected device(s).
Click Exit to close the utility.
3.
Once you get the IP address of the device, launch the Web
browser to access your device.
TIP
The Installation CD-ROM provides a setup program that
allows you to install IPFinder on your computer.
- 6 -
