Page 26
Note that manual scoring must be enabled, either by the
Lane Control System
or
via a switch on the ALS board.
4.9
Redisplaying the last pin fall
On system with on-screen pindication, it is possible to redisplay the position of the
pins still standing.
Simply touch the
PINS
button on the left or right score grid.
4.10
Correcting a Score
To correct a score, touch
MENU
, then
CORRECT A SCORE.
A score grid will
be displayed. If the wrong lane is displayed, press
OTHER LANE.
Touch the frame that you wish to correct. The red cursor should move there. Select
the ball that you wish to correct by touching
1
st
BALL
,
2
nd
Ball
, or
3
rd
BALL
(tenth frame only). Now touch the correct score.
You may have to correct both balls in a frame for the score to be valid.
Corrected scores are shown underlined.
To restore a corrected score to its previous value, touch
RESTORE
.
To remove a score so that it can be re -bowled, touch
RESTORE
. Note that the
newly bowled score is underlined, to show that it was not the original score but that
it has been changed.
4.11
Resetting the Pins
To reset the pins, touch
MENU
then
RESET PINS.
There are two option, with or
without scoring. If you select
WITH SCORING
, then the pinspotters will cycle
and will score the pins standing. If you select
WITHOUT SCORING
, then the
pisnpotters will cycle but the ball will not be scored.
4.12
Viewing another Lane
To view another lane,s score, touch
MENU
then
VIEW ANOTHER LANE,
then
touch the lane number that you wish to view.