616000191_ENG Rev. 111114-0
9 - 12
The Tester can be reprogrammed and updated with a PC and the USB cable supplied in the package,
and with dedicated SW.
USB PC-TESTER
CONNECTING
CABLE
PERSONAL
COMPUTER
OBD AEB214 PLUS
TESTER
1) Click on a flag to change the language setting for the programming software.
2) "Start programming OBD tester" button. The computer does not have to be connected to the Internet
while the tester is programmed.
3) Firmware version.
4) Program exit button.
Download the software at http://www.aeb.it, “Products” menu, “Sundry Items” category, “Diagnostic
tools”, “AEB214PLUS”, “download software”.
After the “OBDScanTool” software has been installed on your PC, the icon shown to the side will appear
on the display
. Double-click on the icon to run the software for programming the OBD Tester.
3.2 UPDATING/REPROGRAMMING PROCEDURE
2
3
4
1
3.1 CONNECTION FOR REPROGRAMMING/UPDATING
Fig. 1
OBD Scan Tool v.X.XX
USB
Switching on the Tester
The AEB214 PLUS Tester switches on automatically when it is
connected to the USB port on the PC using the cable provided.
When it switches on, the screen shown in Fig. 1 appears on
the display.
If necessary, press any key to select the desired language.
IMPORTANT:
When the tester is connected for the first time, the
display may take several seconds to light up, because the
operating system on the PC must recognize the device
and load the required drivers.
3. PROGRAMMING AND UPDATING THE TESTER
