background image

                140cc 4 Stroke Petrol Lawn Mower 

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909

MODEL: №. 52371 

(toll free)

AFTER SALES SUPPORT

(toll free)

140cc 4 Stroke Petrol Lawn Mower 

e-mail: [email protected]

1800 909 909

MODEL: №. 52371

18

19

Fuelling

IMPORTANT: Fuel goes off after about 3-4 months. If you find your lawn 

mower does not start, first change the fuel in the tank with newly purchased 

fresh unleaded fuel. Do not use ethanol based fuels.

WARNING. Do not refill fuel tank while engine is running  

or is hot.

•    Be careful not to admit dust, dirt, water or other foreign objects into the fuel.
•    Wipe off spilt fuel thoroughly before starting engine.
•    Ensure you DO NOT fuel the lawn mower in close proximity to any open 

flames, lit cigarettes, or hot objects.

1.   Unscrew the fuel tank cap (19) and pour fresh unleaded fuel into the tank 

with the aid of a funnel. (Fig M )

2.   Fill the tank to approximately 2.5 cm below 

the lowest portion of the neck to allow for fuel 

expansion. Be careful not to over fill or spill any 

fuel.   If this happens, wipe the spill with a  

clean rag.

3.   Start the engine at least 3 metres away from the 

area where the fuel tank has been filled in order 

to avoid the risk of fire.

M.

Adjusting the Cutting Height

WARNING:  Stop the engine and unplug the spark plug before any repairs 

or maintenance operations.
The mower has one lever to easily adjust the cutting height.  

There are 8 height settings.
NOTE: Always try to adjust the cutting height of the lawn mower while 

positioned on the area of grass you plan to mow.
It is recommended to start on a higher setting and mow a trial area of lawn 

before deciding on the final cutting height position.
1.    Stop the engine of the lawn mower before making a height adjustment. 

To increase the cutting height pull the height adjustment lever (13) 

outward towards the wheel, and move it up a notch, towards the rear  

of the lawn mower. (Fig N)

2.   To decrease the cutting height pull the height adjustment lever (13) 

outward towards the 

wheel,  and move it 

down a notch, towards 

the engine. (Fig O)

3.   After adjustment, 

ensure the lever is fully 

located in the selected 

notch.

Starting the engine

Take note of the following warnings before starting your lawn mower:
•    Never allow young children to operate power tools or equipment. 
•   Make sure children and pets stay indoors while you’re working.
•    Before starting up the lawn mower, walk the area. Relocate toys, hoses, 

rocks and sticks. Debris such as stones, wood chips and pieces of aged 

blades can be propelled at high speeds, which can cause a fatal accident.

•    Slow down and take care when mowing around corners, trees, shrubbery 

or other obstacles.

O.

N.

Содержание 52371



















Отзывы: