Page 17
8. Can I disconnect from my router and “forget” the
associated WiFi SSID?
Yes, you can do that by pressing and holding both physical
buttons on the MemCard PRO2 while it is booting up. A
message will appear, and once you release the buttons, the
MemCard PRO2 will reset to Access Point mode. You
should be able to scan for the access point and start the
WiFi Setup Wizard again. Please note that this will reset
your MemCard PRO2 settings to the factory defaults, but
will not erase any of your save data.
9. I disabled the WiFi from the settings page, but now I
want to enable it again. How can I do that?
You can re-connect to the WiFi by pressing down and
holding the left button on the device. Once the message
“Release for WiFi” appears on the display, release the
button and the MemCard PRO2 will attempts to connect to
your associated WiFi.
10.
**
I can’t find any settings to enable different size PS2
memory cards or Cloud Backups! Is my card faulty?
At the moment of writing these features have not been
released to the public yet. We are still testing them to make
sure they don’t cause any loss of data before we make
them available to everyone. Please rest assured that the
features will be enabled very soon with a firmware update,
as soon as we confirm that the core functionality of the card
is stable enough! We appreciate your patience.
FAQs & Troubleshooting
Содержание MemCard PRO2
Страница 1: ...Page 1...
