8BitMods MemCard PRO2, Руководство пользователя

Страница: 16 / 18

Page 16
1. What file system formats does the MemCard PRO2
support?
The MemCard PRO2 only supports a simple MBR partition
scheme with a FAT32 or exFat volume. Please use the
official SD Card Formatter software for maximum
compatibility.
2. Can the MemCard PRO2 work without an SD card or
USB Flash Disk?
The MemCard PRO2 requires either a microSD card or USB
flash disk to be connected in order to function correctly.
3. What consoles does the MemCard PRO2 support?
The MemCard PRO2 has only been tested with the original
PlayStation 1 and PlayStation 2 consoles..
4. What VMC card formats does the MemCard PRO2
generate / support?
The MemCard PRO2 can only create and use raw Memory
Card images. The file extension used is “.mc2” and the files
have no extra headers. Any header-less memory card
image can be used with the MemCard PRO2, as long as it
is properly named and has the .mc2 extension.
5. Can I use my MemCard PRO2 saves with an emulator /
Can I use my emulator saves with MemCard PRO2?
Yes! Both use cases are possible as long as the files used
have no extra headers.
6. I have connected my MemCard PRO2 to my local
wireless network, but I can’t open the WebUI page!
A few different causes can lead to this, with the most
common being that the remote device is not on the same
subnet as MemCard PRO2. You should connected to the
same network as the MemCard PRO2 in order to access its
WebUI.
Another reason is that the MemCard PRO2 was
unsuccessful connecting to your wireless network. You can
try moving the console and MemCard PRO2 closer to your
router if that’s the case, or changing the WiFi channel of
your router to one that’s not used by other routers around
your building.
If you don’t see an IP address on the MemCard PRO2, and
the WiFi icon shows an “x”, this means that the connection
was unsuccessful.
Finally, if a blank page white page with an error message
comes up, then this means that the sd card was not
prepared properly and that the “os” folder is missing or in
the wrong place. Please follow the setup instructions on
this manual carefully and try again.
FAQs & Troubleshooting