User manual EasyTop 2 kW audio system
4SeasonsSpa
®
27
8.2 Getting started
Power On / Off
Push (1) to power up unit , Push again to turn unit off.
Adjusting the Volume
Rotate Volume knob (4) to increase or decrease volume level. Current setting is displayed for a few seconds.
Mute
Push (2) to mute sound, push again to resume
Program Selection
Press the Source button (3) to cycle through the available program sources: Tuner>CD>CD Changer> AU-1> AU-
2> Tuner
If a source is not active or disconnected that source will not appear.
If the CD Changer is attached but has no magazine inserted it will display “EJECT”
Adjusting the Audio levels
Pressing
AUDIO
button (12) will indicate
BAS
(Bass Level)
TRE
(Treble) BAL (Balance) or
Fade.
When the
desired function is on the screen use the volume knob to adjust values. Display will return to Volume mode after 3
seconds.
Bass
and
Treble:
“C - 0”indicates centre, -2 to –12 is Bass cut +2 to +12 is increased level.
Balance:
“C 0” indicates centre, L1 to L15 indicates left bias. R1 to R15 indicates right bias.
Fade:
“C 0” indicates centre, F1 to F15 indicates front bias. R1 to R15 indicates rear bias.
Setting The Clock
:
Hold the
SET
button (16) for 2 seconds until the first digit of the time flashes. Use the
TUNE/SEEK-UP
button (15)
or
TUNE/SEEK Down
(14) to set the Hour.
Press the
SET
button to toggle the display between Clock and Radio Modes.
Opening and Closing the front panel:
Place thumb on the front panel latch button (20 ) Firmly depress the button while pulling the front panel open. Keep
door firmly closed except when changing discs.
Radio Operation:
Press the
SOURCE
button (3)to select the Radio Mode. Pressing the
Band
Button (19) will toggle through the
available radio modes: FM1, FM2, FM3, AM1, AM2. Each band stores up to 6 independent presets, for a total of 18
FM and 12 AM presets.
Automatically setting the presets:
To automatically set the presets to the next higher stations, press the preset button (6-11) from which to start
programming. Hold the AUTO button (13) for at least 2 seconds. The current preset and additional preset
memories up to P6 will be programmed with the next tunable stations.
To select only the strongest stations, be sure the unit is set to LOCAL mode (17).
All 18 FM and 12 AM presets can be set sequentially by selecting the next band and continuing the operation during
auto programming.
