User manual EasyTop 2 kW audio system
4SeasonsSpa
®
16
4.
Using the Spa
a.
First time use
Check the following before turning the spa on for the first time:
-
Ensure there is sufficient water inside the spa
-
Ensure the appropriate valves are open in the mechanical room
b.
Using the spa
Generally, the temperature of the water used to fill the spa will be lower than the desired water temperature for use
(36°C). For this reason, when started, the controller will start pump 1 to a low speed setting and will activate the
heater as well.
While you are inside the spa, it can be activated in the following manner:
•
First turn on pump 1 at high speed by pressing the pump 1 button once or twice, and then the pump 2 button.
•
Check if all jets are open, by turning the end of the jets they can be closed or opened.
•
If you have adjustable jets, they can be turned in the desired direction.
•
It is normal for persons who are using the spa to regularly change location to enjoy the various massage
options at the various sitting and/or lying positions (depending on the spa type).
•
Position the cover on top of the spa after use. This will have an insulating effect and will prevent children from
entering the spa accidentally.
•
c.
Regulating the Jet power
The pumps force a large amount of water through the jets. It is
possible to add more force to the jet by adding air to the water. The
air supply is regulated using 4 air valves/ controls, two for each pump.
Turn the tap to the left to open the air supply or to the right to close
the air supply. You will only see an effect when the pumps are
operating at high speed. The air valves are the small turning buttons.
The 2 diverters can be used to distribute the massage jet evenly or towards the left or the
right of the spa. Each pump has its own diverter which can divide the output of the pump
over two groups. Using these diverters the desired massage intensity can be set. It is
best for the diverter to turn the pumps off while setting it in the right direction. The force
required to move it will be far less when it is not operational. It is beneficial to grease the
inside of the diverters with acid-free Vaseline; this will keep them moving more smoothly.
Fig. 4.2
Neck jets
If the spa is equipped with neck jets at one of the seats then these can be activated by turning the handle nearby
the seat to the open position. This button looks like an air valve. To use these neck jets the seat has to be in use by
running the pump and the appropriate diverter to send the water to that particular seat.
Fig. 4.1
