User manual EasyTop 2 kW audio system
4SeasonsSpa
®
20
5.1 Winter modes
The spa can be used throughout the year, and especially in winter spa use is very enjoyable. In the event of
freezing there are special procedures to observe in order to prevent freezing of the plumbing if the spa is not in use.
We recommend the following if you are not using the spa:
Winter Measures Method 1
(PREFERRED)
•
We recommend to ALWAYS run the spa and to maintain the water correctly. This way the spa will use a
minimal amount of power.
•
Keep the spa filled with water.
•
Set the temperature to 16 °C.
•
Set the filter cycle to 2 hours.
•
Cover the spa.
The spa cannot freeze, as long as the power supply is maintained.
Winter Measure Method 2
1.
Add a significant amount of anti-freeze fluid to the water and ensure it is properly distributed by running
the pumps. Ask you dealer how much to use, this depends on the brand anti-freeze you use.
2.
Empty the spa as described in section 5 Emptying the spa. The spa, plumbing and pumps should not
contain any water. This cannot be achieved just by regularly emptying the spa.
3.
Loosen all connections in the mechanical room and release them. All connections have to be greased with
acid-free Vaseline and stored in an area that will not experience frost.
4.
Secure the cover on the spa, and pack the spa as best as possible.
5
Before re-using the spa make sure it is sufficiently flushed with clean water to remove any remaining old
water and anti-freeze fluid.
Note:
4SeasonsSpa recommends never leaving the spa without water and no warranty is given to damages
resulting from this. The various connectors and components could dehydrate resulting in the development
of leakages. 4 Seasons Spa cannot guarantee the spa will not freeze even if anti-freeze is used. Freezing
of the plumbing can cause cracks, which is also not covered by the warranty.
