PRO-150 V1.0 11/18
Page 16
www.4qd.co.uk
10. Programming
Overview
The Pro-150 has 10 separate 'profiles' built in, each one can be tailored to a
different application such as a golf buggy or a model locomotive. Each profile has a
number of parameters that can be adjusted such as top speed and acceleration.
The factory settings for the parameters of each profile are given in the table on
page 18.
Programming is done via the 3 button programmer which is supplied attached to
the display. The programmer and display should be connected to the Pro-150 as
shown below.
Changing to a different profile
1. Turn off the ignition.
2. Press and hold down the SEL button on the programmer while you turn on
the ignition. The display will flash 00. (or the number of the current profile if
not the default), release the SEL button.
3. Press the SEL button again briefly, the display will now show a steady 00
without the dot.
4. Use the + and - buttons to select the number of the profile you want.
5. Press SEL again and use the + button to increment the display (which is
now showing the parameter number) to 14 and beyond to PG.
6. Press SEL
The relays should click and the Pro-150 is now ready for action.
