PRO-150 V1.0 11/18
Page 17
www.4qd.co.uk
Adjusting a parameter within a profile
1. Follow steps 1 & 2 above.
2. Use the + and - buttons to select the number of the parameter you want to
adjust.
3. Press SEL, the display will now show a number that corresponds to the
current value of that parameter.
4. Use the + and - buttons to adjust the value of the parameter as required.
5. Press SEL again to return to the parameter number, at this point you can
either select another parameter to adjust, or save and exit.
6. To save the adjustments use the + button to increment the display to 14
and beyond to PG.
7. Press SEL
The relays should click and the Pro-150 is now ready for action.
Note: When displaying a parameter number, the decimal point will flash slowly.
When displaying a parameter value the decimal point will either not be present or
will not flash.
Warning
After altering any parameter, do take care to check that the machine does what is
expected. 4QD are not responsible for any unexpected behavior caused by the
programming.
