4Links Diagnostic SpaceWire Interface Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 47

4Links Diagnostic SpaceWire Interface Скачать руководство пользователя страница 44

Page 44

20.2

Environment

The system is for use only in environments having EU Pollution degree 2 or better (i.e. normally only non-
conductive pollution; temporary condensation is allowable). This is expected to include offices, laboratories, test
stations and clean-rooms.

Altitude: up to 2000 m

Temperature: 5 to 35

◦

C. Note: The ventilation holes must not be obstructed.

The 4Links RG platform products require unobstructed airflow to their rear ventilation grilles to allow the internal
fans to operate efficiently and thus to allow operation across the temperature range specified in above.

20.3

Power Supply

The power input is designed to accept DC 22 to 50 V, with either polarity. The power input circuit is isolated from
both the rest of the circuit and from the equipment case. The potential difference between the power source and
the equipment case (functional ground) must not exceed 50 V. A 1.2MΩ resistor is fitted internally to prevent the
build-up of a static potential difference between the power input and the case.

Note: This input has limited surge protection and must be connected to a surge-free supply. The AC/DC adapter
supplied with the unit contains surge protection at its mains-voltage input and should be used where surge
protection is required.

CAUTION:

The DC adapter supplied with the unit provides mains isolation to UL60950 / EN60950. If an alternative power
source is used, it must have an equivalent rating.

20.3.1

Power Consumption

Total power consumption depends on the number of active ports and options: up to around 25W.

20.3.2

Grounding for Electrical Safety

CAUTION:

The chassis must be maintained at a safe potential. The electrical ground for the circuits driving the SpaceWire
connector signals is connected to the chassis.

A functional ground connection is provided by the mains power supply that is shipped with the unit.

20.3.3

Fuse Protection

Each power input line includes an internal fuse.

«
...
42
43
44
45
46
...
»

Содержание Diagnostic SpaceWire Interface
















































Отзывы:

Нет отзывов