Quick Installation Guide
HSG200 802.11n/b/g Hotspot Gateway ENGLISH
3
Top LED Panel
1
LED ON indicates power on; OFF indicates power off.
2
LED ON indicates WAN connection; OFF indicates no connection;
BLINKING indicates transmitting data.
3
LED ON indicates LAN1/LAN2 connection; OFF indicates no
connection; BLINKING indicates transmitting data.
4
LED ON indicates wireless ready.
5
LED ON indicates outbound internet connection is alive; LED OFF
indicates that outbound internet connection is down. The detection
interval is 1 minute; hence it reflects the connection status within the
last minute.
6
For indicating WES status during WES setup:
Master
Slave
WES Start
LED BLINKING SLOWLY
LED BLINKING
QUICKLY
WES Negotiate
LED BLINKING SLOWLY
LED BLINKING
QUICKLY
WES Fail (Negotiate
Timeout)
LED OFF
LED OFF
WES Success
LED ON for over 5
seconds
LED ON for over 5
seconds (after Master
displays WES Success)
7
For future usage only.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299