Quick Installation Guide
HSG200 802.11n/b/g Hotspot Gateway ENGLISH
10
Step 3. Authentication Settings for Public Zone
•
For public zone (by default, authentication is enabled), authentication can be enabled
or disabled. Clients shall log in the system before using network service if
Auth
Required
is enabled.
When authentication is enabled, a default authentication server shall be configured.
HSG200 supports 4 kinds of authentication servers including Server 1 (LOCAL), Server 2
(RADIUS), Server 3 (RADIUS), and On-demand (ONDEMAND).
•
By default, the
Default Auth Server
is ONDEMAND.
•
Use default or set your desired
Postfix
, apply a
Policy
if needed.
•
A On-demand account can be created from a default billing plan and added to the
database via the
Create
button. If On-demand accounts are not required, click
Next
to
go directly to
Step 4
. However, it is recommended to create one account in order to
verify the system‘s readiness upon completion of this
Setup Wizard
.
4Gon www.4Gon.co.uk [email protected] Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299