VISIX S-Series Network Camera
|
USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
39
day.
5.
Set the
Alarm Actions
for Motion Detection. Click
tab to enter the
Linkage Method
interface.
The user can specify the camera’s response when an event occurs. This is referred to as a linkage method. The
following contents are about how to configure the different types of linkage methods.
Figure 5-14
Linkage Method
Toggle the checkbox to select the linkage method. Notify Surveillance Center, Send Email, Upload to
FTP/Memory/NAS, Trigger Alarm Output and Trigger Recording methods can be selected..
Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event occurs.
Send Email
Send an email with alarm information to a user or users when an event occurs.
NOTE:
To send an Email when an event occurs, you need to refer to
Configuring Email Settings
to
set the Email parameters.
Upload to FTP/Memory/NAS
Capture the image when an alarm is triggered and upload the picture to an FTP server.
NOTE:
FTP parameters must be configured. Refer to
Configuring FTP Settings
for setting FTP
parameters.
Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
NOTE:
To trigger an alarm output when an event occurs, refer to
Section 5.2.5 Configuring Alarm
Output
to set the alarm output parameters.
Trigger Recording
Record a video when an event occurs.
NOTE:
You have to set the recording schedule to utilize this function. Refer to
Section 5.1.1