Hardware and Installation Manual
|
VISIX V-Series All-in-One Cameras
–
Gen I
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
47
Installation
Steps:
1).
Drill three small holes for plastic anchor and one hole for cabling work on the ceiling based on
the holes of the bracket. Refer to
Location of the Holes for M3x6L Bolts
on the next page to
identify the holes information.
2).
Insert the plastic anchors (3ea) to the drilled three holes.
3).
Fix the bracket on the wall by tightening the tapping screws (3ea) into the plastic anchors.
4).
Detach the dome cover from the camera by loosening the bolts with the hex wrench included
in the camera package.
5).
Fix the camera at the bottom of the bracket with the M3x6L bolts. Ensure that the necessary
cables are properly connected to the camera.
6).
For the last parts of the installation, refer to the steps 7 to 10 in Section 4.4: Installing the
Camera - Installation without Bracket of this manual.
W M B - 3202/C M B - 3202
This guid e illustrates ho w to assem ble the co rner m ount adapter and
p ole m o unt ad ap ter.
C heck the letter of the alp habet assigned to each adapter and tighten
the screw s in the corresp onding holes to assem b le the adapter.
A - A - A (M 3TA P )
A
B
B
A
A
IP N 3202H D
B - B (M 3TA P )
IP N 302H D
Tapping Screw
Wall Mounting Bracket
Plastic Anchor