VISIX Camera Quick Start Guide |
VX-2A-B-IWD (R)
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
5
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
5
2
Adjusting Angle of the Camera
Steps:
1).
Adjust the camera to the desired angle by unscrewing the joints referring to the following pictures.
2).
Connect to the web page of the device to see its real-time image in order to check whether its angle is
correctly adjusted. Refer to
Section 5:
View Video on Camera Web Interface
for details about using its
web page.
3
Adjusting Zoom and Focus
Steps:
1).
Unscrew the zoom puller and the focus puller counter-clockwise.
2).
Adjust the zoom and the focus of the lens.
3).
Tighten the zoom puller and the focus puller again by turning it
clockwise after the zoom and the focus are properly adjusted.
CAUTION:
Manual adjustment of Zoom and Focus is only possible on the
VX-2A-B-IWD
model version. Zoom and Focus
controls can be configured digitally from the camera’s web interface for
VX-2A-B-RIWD models.
See the VISIX
V-Series All-in-One Camera User Manual for more details on adjusting lens settings from the camera’s web
interface.
Zoom Puller
Focus Puller
Adjust the joint to install
the camera on the wall.
Tilting adjustment
Panning adjustment