www.3sixtgear.com
or visit www.3sixtgear.com/support
3
OPERATION
Charging up your Device
1. Locate the desired output port (2 or 5) on the JetPak BasiX Power Bank.
2. Make sure that the selected output is clear of obstruction (dirt/dust etc).
3. Locate the desired charging cable you want to charge your device with (Type-C/Micro
USB/Lightning/30 Pin etc).
4. Plug the cable of choice (USB-A end) into the desired output port (2 or 5) making sure to lightly push
it in (do not push with excessive force).
5. Plug the cable connector (Type-C/Micro USB/Lightning/30 Pin etc) into your device and push it in
making sure it is connected (do not push with excessive force).
6. Push the Power on/off button (1). The device will then commence charging. A visual/audible
notification will be made via your device if off silent mode.
7. To stop charging simply remove the cable from device or the 3SIXT JetPak BasiX Power Bank from the
cable and charging will discontinue.
Charging up JetPak BasiX Power Bank
1. Locate the Micro USB input port (3) making sure it is clear of dirt/dust.
2. Locate your included USB-A to Micro USB charge cable.
3. Connect the USB-A connector end into your wall charger.
4. Connect the Micro USB connector cable end into the Micro USB input (3) on the 3SIXT JetPak BasiX
Power Bank. If charging with a BYO Micro USB cable, please connect the Micro USB cable end into the
Micro USB input (3).
5. Switch wall charger power source on and you will see the LED Indicators flash individually from left to
right (4) and recommence from the level of charge it is at currently (one flash on/off every second).
Understanding the LED Indicators
