User Manual
3onedata proprietary and confidential 24
Copyright © 3onedata Co., Ltd.
Interface Elements Description
Note:
When password verification is enabled, only users with "admin"
account privileges can send / receive messages using this device.
The first data sent by the peer server to the device defaults to
the check password.
Verification password is "admin" account password.
If the password is entered incorrectly, re-establish the
connection and then re-enter the password.
Send_msg
The information sent after the device is connected to the
peer server. The options are:
Ipaddr: After the connection is successful, send the IP
address of the device to the remote server.
Devicename: After the connection is successful, send
the devicename of the device to the remote server.
turnoff: After the connection is successful, no
information is sent to the peer server.
Connection control
Select how the serial server initiates a connection request.
The options are:
Always: Immediately after the system is started, it tries
to establish a connection with the target host and
automatically reconnects the target host after the
connection is disconnected.
Char: Automatically connects to the target host when
receiving data from the serial port.
DSROn: Automatically connects to the target host when
the DSR signal is detected.
DCDOn: Automatically connects to the target host
when the DCD signal is detected.
Disconnection
control
Select how the serial server is disconnected. The options
are:
None: Never shut down the network connection
automatically.
DSROff: Automatically shuts down the network
connection when the DSR signal is detected invalid.
DCDOff: Automatically shuts down the network
connection when the DCD signal is detected invalid.
Idle: If the idle timeout time is greater than 0, the
system will automatically shut down TCP connections
that do not have any data send and receive activity for a