3onedata IES7110 3GS Series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 57

3onedata IES7110 3GS Series Скачать руководство пользователя страница 15

User manual

CHAPTER 6 WEB MANAGEMENT

IES7110-3GS series have WEB server inside, can manage and maintenance the device very intuitive

through WEB interface

6.1 Configurate preparing

1. The lowest requirement for user's computer is as below:



Install operating system (Windows XP/2000,etc)



Install Ethernet card



Install Web explorer (IE6.0 or higher version)



Install and start TCP/IP protocol

2. Establish the correct network configuration

The default management IP address of IES7110-3GS series: 192.168.1.254, subnet mask as:

255.255.255.0. Before access to the configuration interface, the computer's IP address and the switch must be
configured in the same subnet (IP address configuration,please refer to "5.1") if need local configuration;
Computers and switches must be routed reach if for remote configuration.

How to log on to Web Server

Please type in the default IP of switch on the browsers’s address bar, and then will pop-up a window by

clicking the “enter” key which shows you have to enter your user name and password. The default username and
password is “admin”. You can enter your username and password 3 times if you found the username and
password is incorrect.If the 3 input error, the browser will display a "401 Unauthorized" error message. Refresh
the page and then enter the correct user name and password, log on to the Web Server, it will recommend to
modify the user name and password.Please contact our customer service center if you have more questions.

(Figure 6.1.1)

The default username and password is [admin], case sensitive for this series. The default password is with

administrator privileges.

Menu Introduction:

«
...
13
14
15
16
17
...
»

Содержание IES7110 3GS Series


























































Отзывы:

Нет отзывов