i Dangers, warnings and cautions
3M
TM
WIBGET
TM
Heat Stress Monitor WB-300 User Manual
Dangers, warnings and cautions
Danger!
Failure to observe the following procedures may result in serious personal injury
• This instrument is not intrinsically safe, do not use in hazardous locations.
Warning!
Failure to observe the following procedures could damage the instrument
• Read the manual before operation.
• Do not store in temperatures exceeding 100°C (212 °F)
• Do not immerse in liquids.
• Condensation may damage your instrument.
• Substitution of components may impair the accuracy of the instrument. Repair should
be completed by authorized service personnel only.
Caution!
General
• Replacement of 9-V alkaline battery only in a non-hazardous locations.
• If recharging with a NiHM Battery pack, recharge only in a non-hazardous environment.
• A non-condensing environment is required for proper measurements.
• Do not charge battery outside the range of 0°C to 40°C (32°F to 104°F).
• Battery run-time may be reduced when operating at lower than 0°C (32°F)
temperatures.
Intended Use
The WIBGET WB-300 is intended to measure environmental temperatures for heat
stress analysis. Consult your company’s safety professional for local standards, or call 3M
at 1-800-243-4630.
www.
GlobalTestSupply
.com
Find Quality Products Online at: