3M™ MicroTouch™ Controller RX182 Reference Guide
5
3M Touch Systems, Inc. Proprietary Information
Introduction
3M Touch Systems offers several advanced controllers designed for reliability and easy
installation. Each controller provides superior performance and delivers excellent
stability, sensitivity, accuracy, and fast response.
This reference guide, designed for developers of touch systems, provides installation and
configuration information for the 3M™ MicroTouch™ RX182 controller. This document
includes information on integrating the RX182 controller into your design,
communicating with the controller, installing the MT 7 software user interface, and
troubleshooting setup problems. It also includes a complete description of the firmware
commands and controller specifications.
3M Touch Systems is committed to being a premier supplier in touch systems throughout
the world. As a 3M Touch Systems customer, you are aware that we have strong internal
programs that meet or exceed environmental regulations of our customers and the regions
in which we conduct business.
What You Need to Know
This document assumes you are familiar with firmware commands and how to use them.
Executing some commands may alter the performance of your touch product. You should
be aware of the results of using these commands before executing them.
Important Safety Information
Read, understand and follow all safety information before using this product. Follow all
instructions marked on the product and described in this document. Pay close attention to
the following installation warnings and safety precautions.
Intended Use
The RX182 controller was designed to enable touch in conjunction with other 3M™
MicroTouch™ products. This controller is intended for internal mounting only and is
not suitable for use in hazardous locations.
