3M SST, Руководство пользователя

Страница: 58 / 90

48 • Ch. 5 Testing the SST Transport Unit 75-0302-1450-8, Version 1 SST Transport and Burster Mechanism Manual
7. Close DIP switch 7 on Switch Bank 4 on the SST Terminal Board.
8. Insert a magnetic stripe ticket in the SST Transport. The unit accepts the ticket and
displays “THANK YOU.”
Note: If you see the message “UNREADABLE TICKET,” it means that either the CPU or the
SST Transport has a read or write problem.
9. Open DIP switch 7 on Switch Bank 4 on the SST Terminal Board and return DIP switch 6
on Switch Bank 2 on the Omega SST Controller to the original position. The unit will
switch to SST Ticket Spitter mode.
Note: A ticket may be issued automatically when you switch back to the SST Ticket Spitter
mode.
Testing the SST Transport in the SST Exit Verifier
In order to test the SST Transport in the SST Exit Verifier, you must have tickets that meet all
ticket specifications and facility code requirements from a working SST Ticket Spitter. Once you
have the tickets, complete the following instructions.
1. Turn power switch ON. The message “READY” should be displayed on the SST Exit
Verifier LCD display. This ensures that the Omega SST Controller is communicating
properly with the CPU Board.
Figure 5.3
Omega SST Controller
LCD Display
Programming Keys
Switch Bank 1
Switch Bank 2