Page 20 of 24
P/N 595370-01 Rev B 07/19
SAFETY LISTINGS
WARNING
RADIO FREQUENCY INTERFERENCE (RFI) MAY
CAUSE A MALFUNCTION OF THE DISTRESS
ALARM. USERS OF SCBAS EQUIPPED WITH
THE DISTRESS ALARM MUST BE AWARE
OF THE PROPER OPERATION OF THE
DISTRESS ALARM. FAILURE TO RECOGNIZE
A MALFUNCTION OF THE DISTRESS ALARM
AND TAKE PROPER CORRECTIVE ACTION MAY
RESULT IN SERIOUS INJURY OR DEATH.
FCC COMPLIANCE
FCC Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol
-
lowing two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received, including interference that
may cause undesired operation.
FCC Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for com
-
pliance could void the user’s authority to operate the equipment.
This portable transmitter with its antenna complies with FCC’s RF exposure limits
for general population / uncontrolled exposure.
INDUSTRY CANADA COMPLIANCE
Industry Canada Statement
The term “IC” before the certification / registration number only signifies that the
Industry Canada technical specifications were met.
The installer of this radio equipment must ensure that the antenna is located or
pointed such that it does not emit RF field in excess of Health Canada limits for the
general population. Consult Safety Code 6, obtainable from Health Canada’s web
site: https://www.canada.ca/en/health-canada.html
This device complies with Industry Canada's license-exempt RSSs. Operation is
subject to the following two conditions:
•
this device may not cause interference, and
•
this device must accept any interference, including interference that may cause
undesired operation of the device.
CLASS B DIGITAL DEVICE
Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de
-
signed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
CAUTION
DO NOT USE A FIBERGLASS WRAPPED
ONE HOUR CYLINDER ON A MODEL 4.5 3M
SCOTT AIR-PAK SCBA EQUIPPED WITH A
DISTRESS ALARM AS THE WEIGHT WILL
EXCEED THE 35 LBS APPROVAL LIMIT FOR
SCBA’S ESTABLISHED BY NIOSH.
La Déclaration de Canada d'industrie
L' « IC » de terme avant que la certification/le nombre d'enregistrement signifie
seulement que le Canada d'Industrie spécifications techniques ont été rencontrées.
Le programme d'installation de cet équipement de radio doit garantir que l'antenne
est localisée ou tel est indiqué qu'il n'émet pas le champ de RF dépassant les
limites de Canada de Santé pour la population générale. Consulter le Code de
Sécurité 6, procurable du site Web de Canada de Santé : https://www.canada.ca/
en/health-canada.html
Cet appareil est conforme aux normes Industry Canada exemptes de licence RSS
standard(s). L'opération est assujetti au suivre deux conditions:
•
cet appareil ne peut pas causer l'intervention, et
•
cet appareil doit accepter de l'intervention, y compris l'intervention qui peut
causer l'opération non désirée de l'appareil.
Содержание SCOTT PAK-ALERT
Страница 23: ...Page 23 of 24 P N 595370 01 Rev B 07 19 NOTES ...
