19
5. Enter the width of each block and press
OK
. The
factory default is 0.5” (17.5 mm).
6. Select
Done
(
ESC
) to create the label.
7. Enter the text for each terminal.
Use
SHIFT
+
,
or
=
to move among terminals.
To create data for the terminal blocks automatically,
see
Creating a Series of Labels
on page 22.
Creating Module Labels
The Module label type allows you
to label a row of fuses. You set the
width of a fuse and the number of
fuses, enter the desired text for
each fuse, and print. The result is a
long label with multiple, evenly
spaced text for each port. You can use fuse multipliers
to adjust the width of individual modules as necessary.
To create a module label
1. Press
MODULE
.
2. Select
Fuse length
and press
OK
.
3. Enter the fuse length and press
OK
. Select the
length that applies to the smallest size fuse in the
module. You can then use fuse multipliers to
increase the size of any individual modules that are
larger. See step 6. The factory default fuse length is
0.5”.
4. Select
# of modules
and press
OK
.
5. Enter the number of modules for this label and
press
OK
.
6. Adjust the size of individual modules using fuse
multipliers. See
Using Fuse Multipliers
.
7. Select
Done
(
ESC
) to create the label.
8. Enter the text for each module. Use the left or right
arrow key to move from module to module.
To create the data for the modules automatically, see
Creating a Series of Labels
on page 22.
Using Fuse Multipliers
Fuse multipliers allow you to adjust the size of
individual fuse modules within a module type label.
To adjust the size of an individual module
1. Create a module label as described in
Creating
Module Labels
.
2. Press
SETTINGS.
3. Select
Current label config.
and press
OK
.
4. Select
Multipliers
and press
OK
.
5. Use the arrow keys to select the module number to
adjust and press
=
.
6. Select the multiplier for that module.
7. Press
OK
and then
Done
(
ESC
) to return to the
label.
Printing Empty Modules
You can choose to print empty modules at the end of
Module labels. By default, printing empty modules is
turned off.
To print empty modules
1. Press
SETTINGS
.
2. Select
Print empty modules
and press
OK
.
3. Select
On
and press
OK
.
4. Select
Done
(
ESC
) to return to the label.
Any empty modules at the end of a module label will
now be printed.
Creating Vertical Labels
You can choose to print labels with
the text running vertically. Labels
with multiple lines of text will
print as multiple columns of text.
To print a vertical label
1. Enter the text for your label.
2. Press
VERTICAL
.
3. Enter a length for the label. Select
AUTO
to have the
length of the label automatically set to fit the text.
4. Press
OK
to create the label.
Содержание PL300
Страница 1: ...Portable Labeler PL300 User Guide ...