3M™MicroTouch™ System DST2270DX Integration Guide
7
3M Touch Systems, Inc. Proprietary Information – TSD-25739
CHAPTER 1
Getting Started
The 3M™ MicroTouch™ DST2270DX system is one of the most intuitive interfaces
available for large-format interactive displays. The rugged design of the DST2270DX
sensor is ideal for interactive digital signage, point-of-information applications and
allows for fast, accurate, reliable touch performance that is virtually unaffected by
contaminants, scratches, or static objects on the screen. To begin installing your
DST2270DX sensor, take a few minutes to review this chapter. It is your roadmap to a
successful installation.
Pay close attention to the information contained in the Important Safety Information
section below. 3M Touch Systems recommends that only qualified display technicians
install the sensor.
•
Disassembling a display can be a dangerous procedure. Be sure to follow all
manufacturers' recommendations for assembly and disassembly of your flat sensor
display.
•
Make sure you have the necessary equipment before starting the installation. Refer to
Supplies and Tools Needed for the Installation later in this chapter.
•
Set up a clean, comfortable, and spacious working area. Having sufficient room to
work makes the installation easier.
•
Test your display to ensure good working condition before you install the sensor.
•
Identify the different components to install and review the summary of the
installation procedure. It is important to know how all the pieces eventually fit
together before disassembling your system.
Note:
If any points within this guide are unclear to you, or further clarification is
necessary, please contact your 3M Touch Systems applications engineer.
If you decide to install the sensor, take the following precautions:
•
Follow each procedure carefully, work with the system powered off and unplugged,
and observe all safety information.
•
Protect your investment. The sensor is a glass product. You must handle it with care.
